EXPANSION AND STRUCTURAL JOINTS

EXPANSION JOINT  of natural aluminium and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 100 mm. and mounted on the both sides of the floor with intervals of 35 cm. on screed, concrete and asphalt. Used for parking lots. For moving trucks weighing up to 30t.

EXPANSION JOINT  of natural aluminium.  The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 30-50 mm. and mounted on the one side of the floor with screws on intervals of 50 cm. or by clips. Suitable for floors, walls and ceilings. It withstands pedestrian raffic. 

Clips price - 6.85 lv./pce.

Recommended number of clips for 1 bar with a length of 3.0 m - 5 pcs.

EXPANSION JOINT  of natural aluminium.  The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 50-80 mm. and mounted on the one side of the floor with screws on intervals of 50 cm. or by clips. Suitable for floors, walls and ceilings. It withstands pedestrian raffic. 

The clips for for expansion joints of natural aluminium.  The clip is placed under the strip and pressed into the joint between the two surfaces with a distance of 30-50 or 50-80 mm. The clips are mounted at a distance of about 50 cm without the need to drill the surface. Used for floors, walls and ceilings.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 40-50 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 70 kN and cargo trucks up to 600 kN.

They provide cost efficient and simple solutions to cover interior or exterior floor joints. Monoblock covers can easily be installed by means of clamps and/or butyl tapes for different models. Different load capacities from pedestrian to vehicle are available. Floor covers are designed to align with wall models and manufactured with smooth or striated surface finish. Pure metal structure doesn’t require a special maintenance.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 50-60 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 45 kN and cargo trucks up to 120 kN.

They provide cost efficient and simple solutions to cover interior or exterior floor joints. Monoblock covers can easily be installed by means of clamps and/or butyl tapes for different models. Different load capacities from pedestrian to vehicle are available. Floor covers are designed to align with wall models and manufactured with smooth or striated surface finish. Pure metal structure doesn’t require a special maintenance.

COVER JOINT / working joint, cover type, made of natural aluminum, to withstand vertical loads due to pressure in large buildings or complexes. The cover joint is placed on existing surfaces, above the gap between two separated surfaces with a distance of 50 mm. and is mounted on one side at intervals of 35 cm.. For the movement of forklifts up to 30 kN and cargo trucks up to 600 kN.

EXPANSION JOINT  of natural aluminium and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 100 mm. and mounted on the both sides of the floor with intervals of 35 cm.  It withstands pedestrian traffic. 

EXPANSION JOINT  of natural aluminium and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 150 mm. and mounted on the both sides of the floor with intervals of 35 cm.  It withstands pedestrian traffic. 

EXPANSION JOINT  of natural aluminium and a black or grey synthetic rubber insert. Made to withstand vertical, horizontal and transversal structural movements due to compressive and tensile stress in large buildings or complexes. The joint is laid on existing surfaces, over the void between the two semi-detached surfaces with gap 200 mm. and mounted on the both sides of the floor with intervals of 35 cm.  It withstands pedestrian traffic.